最新消息:20210816 当前crifan.com域名已被污染,为防止失联,请关注(页面右下角的)公众号

【记录】给USB转串口转换器DT-5002A安装驱动

RS232 crifan 4106浏览 0评论

【背景】

买了个USB转串口转换器:

帝特 USB转9针串口线 USB转串口线 USB转COM口 USB转RS232 转换线

拿到手后,型号是DT-5002A:

【图】

然后现在查到Win7 x64下,结果不能正常识别:

usb-serial controller d searching windows update for driver

device driver software was not successfully installed for dt-5002a

所以要去安装驱动。

【折腾过程】

1.安装提示,去试试从官网下载驱动:

tap or click to download the new driver from the profilic website for pl-2302 usb-to-serial port adapter

download pl2303 profilic driver installer v1.8.17 zip

save zip driver for pl2302 file

2.下载后,解压,得到exe安装文件:

downloaded then unzip got exe for pl2303 installer

3.去安装:

pl-2303 usb-to-serial installshield wizard next

pl-2303 usb-to-serial installshield wizard doing

pl-2303 usb-to-serial installshield wizard completed

4.安装完毕后,重新拔插USB,结果设备管理器中,出现了之前的:

USB-serial controller D

但是驱动没有安装正确:

device manager show usb-serial controller d

然后稍等,就可以正确检测出来了:

prolific usb-to-serial com port com10 ready to use

device manager show com10 ok

 

【总结】

PL2303芯片的USB转串口转换器,相对来说,兼容性是不错的。

转载请注明:在路上 » 【记录】给USB转串口转换器DT-5002A安装驱动

发表我的评论
取消评论

表情

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址
84 queries in 0.163 seconds, using 22.14MB memory